The Cobra™
The New Way™ Cobra™ is the contractor’s choice with its outstanding compaction in a lightweight 20 yd³ body. Add in the Cobra’s large 3 yd³ hopper, available in 9 to 25 yd³ capacities, a variety of container handling options, and you’ll understand why the Cobra™ is setting the standard in the industry.
- Weight: 9,290-12,200 lbs. *
- Capacity: 9-25 yd³
- Hopper Cycle Time: 26-30 sec.
- Product Inquiry
- PDF Product Flyer
| General Specifications (standard) | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model | 9 RL |
11 RL |
13 RL |
16 RL |
18 RL |
20 RL |
25 RL |
||||||||
| Body Capacity | 9 yd³ |
11 yd³ |
13 yd³ |
16 yd³ |
18 yd³ |
20 yd³ |
25 yd³ |
||||||||
| Body Width (A) | 82" |
96" |
96" |
96" |
96" |
96" |
96" |
||||||||
| Body Length (B) | 191.5" |
191.5" |
209.5" |
212.5" |
227" |
244.5" |
270" |
||||||||
| Body Height (C) | 71" |
71" |
71" |
83" |
83" |
83" |
94" |
||||||||
| Approx. Body Weight * (Empty & Exclusive of Options) |
9,290 lbs. |
9,650 lbs. |
10,012 lbs. |
10,323 lbs. |
10,760 lbs. |
11,227 lbs. |
12,200 lbs. |
||||||||
| Hopper Capacity | 2 yd³ |
2.5 yd³ |
2.5 yd³ |
3 yd³ |
3 yd³ |
3 yd³ |
3 yd³ |
||||||||
| Hopper Opening Width | 60" |
74" |
74" |
74" |
74" |
74" |
74" |
||||||||
| Hopper Load Height | Frame |
Frame |
Frame |
Frame |
Frame |
Frame |
Frame |
||||||||
| Hopper Cycle Time (sec) | 26-30 |
26-30 |
26-30 |
26-30 |
26-30 |
26-30 |
26-30 |
||||||||
‡ - Length measured depends on options ordered
* - Approximate Body Weight empty and exclusive of options
** - Any Chassis sent to Scranton Manufacturing with less than the minimum guideline requirements will not be mounted. (Chassis must be capable of carrying the net weight of the body plus the weight of the refuse collected.)
| Roof | 10 GA | 80K GR |
| Sides | 10 GA | 80K GR |
| Floor (sides) | 10 GA | 80K GR |
| Floor (center) | 1/4" | 50K GR |
| Ejection Panel | 10 GA | 50K GR |
| Sweep Panel | 1/4" | 50K GR |
| Tailgate (upper) | 10 GA | 50K GR |
| Tailgate (lower) | 7 GA | 50K GR |
| Hopper Floor (back) | 1/4" | 100K GR |
| Side Panel | 7 GA | 50K GR |
| Hopper Floor | 1/4" | 50K GR |
| US | Metric | |
|---|---|---|
| Oil Reservoir | 40-45 gal | 151-170 L |
| Min. Accept. Oil Flow | 20 GPM | 76 LPM |
| Oil Flow w/std Pump | 29 GPM | 110 GPM |
| Max. Oper. Pressure | 2,000 PSI | 13,790 KPA |
| Engine RPM for STD GPM | 1,200-1,500 | |
| Hydraulic Hoses | 4 to 1 Burst | |
| Hydraulic Filter | 10 micron |
Standard Equipment
- Semi Automatic Cycling
- Auto Back Pack
- Accelerator Kit
- Auto-Lock Tailgate
- Back Up Alarm
- All LED LIghts
- Hydraulic Tank Temperature Gauge
- Right Side Hydraulic Tank Access Port
- ICC Lights and Reflectors
- Sight Gauge on OIl Tank
- Oil Pressure Gauge
- Chrome Cylinders
- Side Access Door
- Driver Alert Buzzer
- Tailgate Ajar Indicator
- Light Bar
- Bolt on Steps on Rear
- Prime Paint
- Pump
- Rear Vision Camera System
Optional Equipment
- Special Lighting
- PTO
- Finish Paint-Imron 5000
- Container Lifts
- Pack at idle
- Hopper Liners
- Magnum Steel Package
- Scale System