With an industry leading compaction rate and its superior rear loading capabilities, the New Way™ King Cobra™ has become an industry standard. Combine the fact that the King Cobra™ has one of the lowest warranty claims of any body in the industry, and you’ve got a refuse truck that packs one powerful bite. 
- Weight: 17,000-19,200 lbs. *
- Capacity: 20-32 yd³
- 26 Seconds Hopper Cycle
- Product Inquiry
- PDF Product Flyer
| General Specifications (standard) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Model | 20 RL |
25 RL |
32 RL |
||||||||
| Body Capacity | 20 yd³ |
25 yd³ |
32 yd³ |
||||||||
| Body Width (A) | 96" |
96" |
96" |
||||||||
| Body Length (B) | 251.5" |
285"‡ |
315.5" |
||||||||
| Body Height (C) | 99.5" |
99.5" |
99.5" |
||||||||
| Approx. Body Weight * (Empty & Exclusive of Options) |
17,000 lbs |
17,900 lbs |
19,200 lbs |
||||||||
| Hopper Capacity | 3.55 yd³ |
3.55 yd³ |
3.55 yd³ |
||||||||
| Hopper Opening Width | 80" |
80" |
80" |
||||||||
| Loading Sill Height | 3.5" below frame |
3.5" below frame |
3.5" below frame |
||||||||
| Hopper Cycle Time (sec) | 25-28 |
25-28 |
25-28 |
||||||||
‡ - Length measured depends on options ordered
* - Approximate Body Weight empty and exclusive of options
** - Any Chassis sent to Scranton Manufacturing with less than the minimum guideline requirements will not be mounted. (Chassis must be capable of carrying the net weight of the body plus the weight of the refuse collected.)
| US | Metric | ||
|---|---|---|---|
| Roof | 10 GA | 3.42 mm | 80K GR |
| Sides | 10 GA | 3.42 mm | 80K GR |
| Ejection Panel | 10 GA | 3.42 mm | 50K GR |
| Sweep Panel | 1/4" | 6.35 mm | 100K GR |
| Floor | 7 GA | 4.55 mm | 100K GR |
| Tailgate (upper) | 7 GA | 4.55 mm | 100K GR |
| Tailgate (lower) | 1/4" | 6.35 mm | 100K GR |
| Hopper Floor (back) | 1/4" | 6.35 mm | 100K GR |
| Side Panel | 7 GA | 4.5 mm | 100K GR |
| US | Metric | |
|---|---|---|
| Oil Reservoir | 50-70 gal | 227 L |
| Oil Flow w/Std. Pump | 36 GPM | 135 LPM |
| Operating Pressure | 2,450 PSI | 16,892 KPA |
| Hydraulic Hoses | 4 to 1 Burst | |
| Return Filter | 10 micron | |
| Engine RPM | 1,275 - 1,550 |
Standard Equipment
- Semi Automatic Cycling
- Auto Back Pack
- Accelerator Kit
- Turn Buckle Locks
- Back Up Alarm
- Light Bar
- LED Lights
- Sight Gauge on Oil Tank
- Oil Pressure Gauge
- Chrome Rod Cylinders
- Side Access Door
- Driver Alert Buzzer
- Tailgate Ajar Indicator
- Bolt on Steps on Rear
- Prime Paint
- Rear Vision Camera System
- Talamar Extreme Hydraulic Fluid
Optional Equipment
- Special Lighting
- PTO & Pump
- Finish Paint-Imron 5000
- Container Lifts (commercial & residential)
- Body Scale System
- Auto Tailgate Locks
- Steel Upgrades
- Extended Warranties